Difference between revisions of "Derivation of the optical Bloch equations"

From amowiki
Jump to navigation Jump to search
imported>Ichuang
imported>Zakven
(→‎Putting it together: the optical Bloch equations: Continuing to update \Omega to \omega_R)
 
(37 intermediate revisions by 5 users not shown)
Line 11: Line 11:
 
A good starting point, to appreciate the problem of open quantum
 
A good starting point, to appreciate the problem of open quantum
 
systems, is the classical model for a two-level atom coupled to a
 
systems, is the classical model for a two-level atom coupled to a
black-body electromagnetic field, the Einstein rate equations
+
black-body electromagnetic field, the [[Interaction_of_an_atom_with_an_electromagnetic_field#Introduction:_Spontaneous_and_Stimulated_Emission|Einstein rate equations]]
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
 
\frac{dN_g}{dt} &=& A_{eg} N_e + u(\omega_{eg})  \left[    { B_{eg}N_e -
 
\frac{dN_g}{dt} &=& A_{eg} N_e + u(\omega_{eg})  \left[    { B_{eg}N_e -
Line 51: Line 51:
 
begin with a [[Decoherence Processes, Mixed States, Density Matrices: Review|review of density matrices]] and how they evolve under
 
begin with a [[Decoherence Processes, Mixed States, Density Matrices: Review|review of density matrices]] and how they evolve under
 
Hamiltonian dynamics.
 
Hamiltonian dynamics.
 +
 +
==== Review of density matrices: definition, properties, and unravelings ====
 +
 
Recall that a density matrix <math>\rho</math> for a pure state <math>|\psi{\rangle}</math> is the
 
Recall that a density matrix <math>\rho</math> for a pure state <math>|\psi{\rangle}</math> is the
 
matrix <math>|\psi{\rangle}{\langle}\psi|</math>.  Thus, for example
 
matrix <math>|\psi{\rangle}{\langle}\psi|</math>.  Thus, for example
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
 
|0 \rangle  &\rightarrow&  \left[ \begin{array}{cc}{1}&{0}\\{0}&{0}\end{array}\right]  
 
|0 \rangle  &\rightarrow&  \left[ \begin{array}{cc}{1}&{0}\\{0}&{0}\end{array}\right]  
 +
\\ &&~
 
\\ |1 \rangle  &\rightarrow&  \left[ \begin{array}{cc}{0}&{0}\\{0}&{1}\end{array}\right]  
 
\\ |1 \rangle  &\rightarrow&  \left[ \begin{array}{cc}{0}&{0}\\{0}&{1}\end{array}\right]  
 +
\\ &&~
 
\\ \frac{|0{\rangle}+|1{\rangle}}{\sqrt{2}} &\rightarrow& \frac{1}{2}  \left[ \begin{array}{cc}{1}&{1}\\{1}&{1}\end{array}\right]  
 
\\ \frac{|0{\rangle}+|1{\rangle}}{\sqrt{2}} &\rightarrow& \frac{1}{2}  \left[ \begin{array}{cc}{1}&{1}\\{1}&{1}\end{array}\right]  
 
\,.
 
\,.
Line 65: Line 70:
 
</math>
 
</math>
 
can be interpreted as a 50/50 mixture of <math>|0{\rangle}</math> and <math>|1{\rangle}</math>.  However,
 
can be interpreted as a 50/50 mixture of <math>|0{\rangle}</math> and <math>|1{\rangle}</math>.  However,
one must be careful, because there are infinitely many ways to {\em
+
one must be careful, because there are infinitely many ways to ''unravel'' a density matrix into statistical mixtures of pure states.
unravel} a density matrix into statistical mixtures of pure states.
+
 
 
For example,
 
For example,
 
:<math>  
 
:<math>  
Line 91: Line 96:
 
statistical mixture of pure states,
 
statistical mixture of pure states,
 
:<math>  
 
:<math>  
\rho = \sum_k p_k |\psi_k{\rangle}
+
\rho = \sum_k p_k |\psi_k{\rangle}\langle\psi_k |
 
\,,
 
\,,
 
</math>
 
</math>
where <math>p_k</math> are probabilities, such that <math>\sum_k p_k = 1</math>.
+
where <math>p_k</math> are probabilities, such that,
 +
:<math>
 +
\sum_k p_k = 1
 +
\,.
 +
</math>
 +
 
 
A matrix <math>\rho</math> is a valid density matrix if and only if the
 
A matrix <math>\rho</math> is a valid density matrix if and only if the
 
eigenvalues of <math>\rho</math> are non-negative, and sum to one, such that
 
eigenvalues of <math>\rho</math> are non-negative, and sum to one, such that
 
<math>{\rm Tr}(\rho)=1</math>.  <math>\rho</math> represents a pure state if and only if
 
<math>{\rm Tr}(\rho)=1</math>.  <math>\rho</math> represents a pure state if and only if
 
<math>{\rm Tr}(\rho^2)=1</math>.
 
<math>{\rm Tr}(\rho^2)=1</math>.
 +
 +
==== Density matrices: closed system evolution ====
 +
 
How does a density matrix evolve in a closed system?  From the
 
How does a density matrix evolve in a closed system?  From the
 
Schrodinger equation
 
Schrodinger equation
Line 117: Line 130:
 
classical field Jaynes-Cummings Hamiltonian
 
classical field Jaynes-Cummings Hamiltonian
 
:<math>  
 
:<math>  
H = \frac{\hbar\omega_0}{2}(|e \rangle  \langle e|-|g \rangle  \langle g|) + \Omega (|g \rangle  \langle e|+|e \rangle  \langle g|)
+
H = \frac{\hbar\omega_0}{2}(|e \rangle  \langle e|-|g \rangle  \langle g|) +
 +
            \frac{\hbar\omega_R}{2} (|g \rangle  \langle e|+|e \rangle  \langle g|)
 
\,,
 
\,,
 
</math>
 
</math>
 
which we may express using Pauli matrices as
 
which we may express using Pauli matrices as
 
:<math>  
 
:<math>  
H = \frac{\hbar\omega_0}{2} Z + \Omega X
+
H = \frac{\hbar\omega_0}{2} Z + \frac{\hbar\omega_R}{2} X
 
\,,
 
\,,
 
</math>
 
</math>
Line 132: Line 146:
 
the equation of motion for <math>\rho</math> is
 
the equation of motion for <math>\rho</math> is
 
:<math>  
 
:<math>  
\dot{\rho} =  \left[ \begin{array}{cc}{i\Omega(\rho_{eg}-\rho_{ge})}&{i\omega_0\rho_{ge}-i\Omega(\rho_{ee}-\rho_{gg})}\\{-i\omega_0\rho_{eg}+i\Omega(\rho_{ee}-\rho_{gg})}&{i\Omega(\rho_{eg}-\rho_{ge})}\end{array}\right]  
+
\dot{\rho} =  \left[ \begin{array}{cc}{i\frac{\omega_R}{2}(\rho_{eg}-\rho_{ge})}&{-i\omega_0\rho_{eg}+i\frac{\omega_R}{2}(\rho_{ee}-\rho_{gg})}\\{i\omega_0\rho_{ge}-i\frac{\omega_R}{2}(\rho_{ee}-\rho_{gg})}&{-i\frac{\omega_R}{2}(\rho_{eg}-\rho_{ge})}\end{array}\right]  
 
\,.
 
\,.
 
</math>
 
</math>
We can recognize this as a rotation of the Bloch sphere about the axis
+
In terms of the matrix components, this is
 +
{{Eq
 +
|math=<math>\begin{array}{rcl} 
 +
\dot{\rho}_{ee} &=& i\frac{\omega_R}{2}(\rho_{eg}-\rho_{ge})
 +
\\
 +
\dot{\rho}_{ge} &=& i\omega_0\rho_{ge} - i\frac{\omega_R}{2}(\rho_{ee}-\rho_{gg})
 +
\,,
 +
\end{array}</math>
 +
|num=3.1.1
 +
}}
 +
noting that <math>\rho_{eg}=\rho_{ge}^*</math> and <math>\rho_{gg}=1-\rho_{ee}</math>.
 +
 
 +
We can recognize this as a rotation of the Bloch vector about the axis
 
defined by
 
defined by
 
:<math>  
 
:<math>  
\vec{n} = \frac{\hbar\omega_0}{2} \hat{z} + \Omega \hat{x}
+
\vec{n} = \frac{\omega_0}{2} \hat{z} + \frac{\omega_R}{2} \hat{x}
 
\,,
 
\,,
 
</math>
 
</math>
Line 150: Line 176:
 
We can build a mathematical model for quantum open system dynamics,
 
We can build a mathematical model for quantum open system dynamics,
 
based on four basic ideas:
 
based on four basic ideas:
\begin{enumerate}
+
<table border=1>
* Density matrix evolution
+
<tr>
Instead of pure states (eg <math>|\psi{\rangle}</math>), we describe the system
+
<td>
state using a density matrix <math>\rho</math>.  The equation of motion
+
Density matrix evolution
for <math>\rho</math> is
+
</td>
 +
<td>
 +
Instead of pure states (eg <math>|\psi{\rangle}</math>), we describe the system
 +
state using a density matrix <math>\rho</math>.  The equation of motion
 +
for <math>\rho</math> is
 
:<math>  
 
:<math>  
\dot{\rho} = { \mathcal  L}[ \rho ]
+
\dot{\rho} = { \mathcal  L}[ \rho ]
 
\,,
 
\,,
 
</math>
 
</math>
where <math>{ \mathcal  L}</math> is known as the Liouvillian operator (or a
+
where <math>{ \mathcal  L}</math> is known as the Liouvillian operator (or a
"superoperator").  For example, for Hamiltonian evolution,
+
"superoperator").  For example, for Hamiltonian evolution,
we have:
+
we have:
 
:<math>  
 
:<math>  
 
i\hbar \partial_t |\psi \rangle  = H |\psi{\rangle}
 
i\hbar \partial_t |\psi \rangle  = H |\psi{\rangle}
Line 173: Line 203:
 
\,.
 
\,.
 
\end{array}</math>
 
\end{array}</math>
This is unitary evolution, but in general, the differential
+
This is unitary evolution, but in general, the differential
equation for <math>\rho</math> can describe non-unitary evolution.
+
equation for <math>\rho</math> can describe non-unitary evolution.
Such differential equations are known as "master equations."
+
Such differential equations are known as "master equations."
They are nontrivial to construct, because they must restrict
+
They are nontrivial to construct, because they must restrict
<math>\rho</math> to be a legitimate density matrix at all times.
+
<math>\rho</math> to be a legitimate density matrix at all times.
* Partial trace
+
</td></tr>
We are interested in the state of the system alone, and want
+
<tr>
to disregard the state of the environment.  If <math>\rho_{\rm
+
<td>
total}</math> is the state of the whole system + environment, then
+
[[Entangled_Photons#Partial_Traces|Partial trace]]
the state of the system alone is
+
</td>
 +
<td>
 +
We are interested in the state of the system alone, and want
 +
to disregard the state of the environment.  If <math>\rho_{\rm
 +
total}</math> is the state of the whole system + environment, then
 +
the state of the system alone is
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
 
\rho_{sys} &=& {\rm Tr}_{env}  \left[    { \rho_{\rm total} } \right]  
 
\rho_{sys} &=& {\rm Tr}_{env}  \left[    { \rho_{\rm total} } \right]  
 
\\ &=& \sum_{\rm env} {\langle}{\rm env}| \rho_{\rm total} |{\rm env}{\rangle}
 
\\ &=& \sum_{\rm env} {\langle}{\rm env}| \rho_{\rm total} |{\rm env}{\rangle}
\,.
+
\,.
 
\end{array}</math>
 
\end{array}</math>
* Assumptions about the environment
+
</td></tr>
The environment is also known as a "bath" or a "reservoir"
+
<tr>
(cf API).  We model it as being an ensemble of oscillators, of
+
<td>
a variety of frequencies, which are weakly coupled to the
+
Assumptions about the environment
system.  It has several important properties:
+
</td><td>
\begin{itemize}
+
The environment is also known as a "bath" or a "reservoir"
* Large and unchanging -- Born approximation
+
(cf API).  We model it as being an ensemble of oscillators, of
* Short correlation time <math>\tau_c</math> -- Markov
+
a variety of frequencies, which are weakly coupled to the
approximation
+
system.  It has several important properties:
\end{itemize}
+
* Large and unchanging -- Born approximation
* Two (very different) timescales
+
* Short correlation time <math>\tau_c</math> -- Markov approximation
There are two important timescales in this model:
+
</td></tr>
\begin{itemize}
+
<tr>
* <math>T_{relax}</math>: A slow evolution of the system
+
<td>
* <math>\tau_c</math>: The fast fluctuations of the environment
+
Two (very different) timescales
\end{itemize}
+
</td><td>
We will build equations of motion which have a timescale
+
There are two important timescales in this model:
<math>\Delta t</math>, chosen such that <math>\tau_c \ll \Delta t \ll
+
* <math>T_{relax}</math>: A slow evolution of the system
T_{relax}</math>.
+
* <math>\tau_c</math>: The fast fluctuations of the environment
\end{enumerate}
+
 
 +
We will build equations of motion which have a timescale
 +
<math>\Delta t</math>, chosen such that <math>\tau_c \ll \Delta t \ll
 +
T_{relax}</math>.
 +
</td></tr>
 +
</table>
 +
 
 
Our goal is to construct a model dynamical equation of motion for
 
Our goal is to construct a model dynamical equation of motion for
 
<math>\rho_{sys}</math> of the form
 
<math>\rho_{sys}</math> of the form
Line 220: Line 261:
 
we construct a master equation for the atom + vacuum using two
 
we construct a master equation for the atom + vacuum using two
 
different approaches.
 
different approaches.
 +
 
=== Beamsplitter model of the master equation ===
 
=== Beamsplitter model of the master equation ===
 
The physical intuition behind the master equation we desire to
 
The physical intuition behind the master equation we desire to
 
construct can be captured with a simple example, which builds on the
 
construct can be captured with a simple example, which builds on the
beamsplitter we studied in previous lectures.  Consider a single
+
beamsplitter we studied in previous lectures.   
 +
 
 +
==== Single photon through beamsplitter: pure state description ====
 +
 
 +
Consider a single
 
photon state <math>|\psi \rangle  =  \alpha  |0 \rangle  +  \beta  |1{\rangle}</math> (for simplicity, let the
 
photon state <math>|\psi \rangle  =  \alpha  |0 \rangle  +  \beta  |1{\rangle}</math> (for simplicity, let the
 
coefficients be real-valued) entering a beamsplitter of angle
 
coefficients be real-valued) entering a beamsplitter of angle
 
<math>\theta</math>:
 
<math>\theta</math>:
::[[Image:chapter4-obe-part-1-obe-fig3.png|thumb|200px|none|]]
+
::[[Image:chapter4-obe-part-1-obe-fig3.png|thumb|400px|none|]]
 +
 
 
A vacuum state <math>|0{\rangle}</math> is input to the other port, whose output we
 
A vacuum state <math>|0{\rangle}</math> is input to the other port, whose output we
 
discard.  Let us consider the photon as being our system, and the
 
discard.  Let us consider the photon as being our system, and the
Line 235: Line 282:
 
<math>p_1 =  \beta ^2 \sin^2 \theta</math>, so that we might expect the output to be
 
<math>p_1 =  \beta ^2 \sin^2 \theta</math>, so that we might expect the output to be
 
<math>|0{\rangle}</math> with probability <math>p_1</math>, and <math>|\psi{\rangle}</math> with probability <math>1-p_1</math>.
 
<math>|0{\rangle}</math> with probability <math>p_1</math>, and <math>|\psi{\rangle}</math> with probability <math>1-p_1</math>.
 +
 
However, that (semi-)classical argument is incorrect.
 
However, that (semi-)classical argument is incorrect.
 
The output state <math>|\phi{\rangle}</math> of the system + environment is
 
The output state <math>|\phi{\rangle}</math> of the system + environment is
Line 248: Line 296:
 
( \alpha |0 \rangle  +  \beta  \cos\theta  |1 \rangle )/\sqrt{ \alpha ^2 +  \beta ^2 \cos^2\theta}</math>, with
 
( \alpha |0 \rangle  +  \beta  \cos\theta  |1 \rangle )/\sqrt{ \alpha ^2 +  \beta ^2 \cos^2\theta}</math>, with
 
probability <math>1-p_1</math>, and <math>|\psi_1 \rangle  = |0{\rangle}</math> with probability <math>p_1</math>.
 
probability <math>1-p_1</math>, and <math>|\psi_1 \rangle  = |0{\rangle}</math> with probability <math>p_1</math>.
 +
 +
 +
==== Single photon through beamsplitter: density matrix description ====
 +
 
These states can conveniently be written as density matrices.  The
 
These states can conveniently be written as density matrices.  The
 
input state is
 
input state is
:<math>  
+
{{Eq
 +
|math=<math>  
 
\rho_{in} = |\psi{\rangle}{\langle}\psi| =  \left[ \begin{array}{cc}{ \alpha ^2}&{ \alpha  \beta }\\{ \alpha  \beta }&{ \beta ^2}\end{array}\right]  
 
\rho_{in} = |\psi{\rangle}{\langle}\psi| =  \left[ \begin{array}{cc}{ \alpha ^2}&{ \alpha  \beta }\\{ \alpha  \beta }&{ \beta ^2}\end{array}\right]  
 
\,,
 
\,,
 
 
</math>
 
</math>
 +
|num=3.3.1
 +
}}
 
and the output state is
 
and the output state is
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
Line 261: Line 315:
 
\,.
 
\,.
 
\end{array}</math>
 
\end{array}</math>
 +
 
Note that <math>\rho_{out}</math> cannot be written as <math>|\chi{\rangle}{\langle}\chi|</math> for any
 
Note that <math>\rho_{out}</math> cannot be written as <math>|\chi{\rangle}{\langle}\chi|</math> for any
 
pure state <math>|\chi{\rangle}</math>, because it is not pure (it is a statistical mixture).
 
pure state <math>|\chi{\rangle}</math>, because it is not pure (it is a statistical mixture).
Line 269: Line 324:
 
\,.
 
\,.
 
</math>
 
</math>
 +
 +
==== Single photon through many beamsplitters: coarse-grained evolution ====
 +
 
Now imagine that we send the single photon state through many
 
Now imagine that we send the single photon state through many
 
beamsplitters in a sequence, each with some small tap angle <math>\theta =
 
beamsplitters in a sequence, each with some small tap angle <math>\theta =
 
\sqrt{\Gamma \Delta t/2}</math>:
 
\sqrt{\Gamma \Delta t/2}</math>:
::[[Image:chapter4-obe-part-1-obe-fig4.png|thumb|200px|none|]]
+
::[[Image:chapter4-obe-part-1-obe-fig4.png|thumb|400px|none|]]
\noindent
+
 
 
We make two assumptions: the environment modes always begin in the
 
We make two assumptions: the environment modes always begin in the
 
vacuum <math>|0{\rangle}</math> (this is the Born approximation), and the environment is
 
vacuum <math>|0{\rangle}</math> (this is the Born approximation), and the environment is
 
completely different and uncorrelated between scattering events (this
 
completely different and uncorrelated between scattering events (this
 
is the Markov approximation).
 
is the Markov approximation).
 +
 
This allows us to write a coarse-grained differential equation for the
 
This allows us to write a coarse-grained differential equation for the
 
photon state
 
photon state
Line 288: Line 347:
 
</math>
 
</math>
 
Expressed as differential equations for each of the independent matrix
 
Expressed as differential equations for each of the independent matrix
elements, we get (using Eq.(\ref{eq:rhoin}) for <math>\rho(t=0)</math>)
+
elements, we get (using Eq.(3.3.1) for <math>\rho(t=0)</math>)
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
 
\frac{d}{dt}  \rho_{00} &=& +\Gamma \rho_{11}
 
\frac{d}{dt}  \rho_{00} &=& +\Gamma \rho_{11}
 
\\ \frac{d}{dt}  \rho_{11} &=& -\Gamma \rho_{11}
 
\\ \frac{d}{dt}  \rho_{11} &=& -\Gamma \rho_{11}
 
\end{array}</math>
 
\end{array}</math>
for the diagonal elements.  These describe the evolutions of the
+
for the diagonal elements.   
 +
 
 +
These describe the evolutions of the
 
probabilities of finding the photon in the <math>|0{\rangle}</math> and <math>|1{\rangle}</math> states,
 
probabilities of finding the photon in the <math>|0{\rangle}</math> and <math>|1{\rangle}</math> states,
 
and are analogous to the Einstein rate equations.  And for the
 
and are analogous to the Einstein rate equations.  And for the
Line 302: Line 363:
 
\end{array}</math>
 
\end{array}</math>
 
which show the decay of the quantum coherence of the state.
 
which show the decay of the quantum coherence of the state.
 +
 +
Note that the input state we have used in this model is a pure state, but essentially the same result holds if the input is a general mixed state.  Specifically, if the input were an arbitrary density matrix
 +
:<math>
 +
\rho = \left[ \begin{array}{cc}a&b\\c&d\end{array}\right]
 +
</math>
 +
then the coarse-grained differential equation for this input would be
 +
{{Eq
 +
|math=<math>
 +
\dot{\rho} = -\frac{\Gamma}{2}  \left[ \begin{array}{cc}{ 2 a}&{b}\\{c}&{-2a}\end{array}\right]
 +
\,,
 +
</math>
 +
|num=3.3.2
 +
}}
 +
 +
==== Comparison to the general master equation ====
 +
 
The form of these differential equations, which are master equations,
 
The form of these differential equations, which are master equations,
 
is very general, and almost exactly the same result is obtained for a
 
is very general, and almost exactly the same result is obtained for a
two-level atom interacting with the vacuum.  In that situation, the
+
two-level atom interacting with the vacuum.  In particular, we shall see that in the master equation for a two-level atom undergoing spontaneous emission, the coherences (the off-diagonal terms) decay twice as fast as the populations (the diagonal terms).  That essential physics is captured perfectly by the beamsplitter model, namely Eq.(3.3.2).
solution differs essentially only in that the coherences evolve as
+
 
 +
There are differences in the atomic master equation, however.  In particular,the coherences evolve as
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
 
\frac{d}{dt}  \rho_{01} &=& - \left(  { i\Delta + \frac{\Gamma}{2}} \right)  \rho_{01}
 
\frac{d}{dt}  \rho_{01} &=& - \left(  { i\Delta + \frac{\Gamma}{2}} \right)  \rho_{01}
Line 312: Line 390:
 
where <math>\Delta</math> is a frequency shift of the system known as the "Lamb
 
where <math>\Delta</math> is a frequency shift of the system known as the "Lamb
 
shift," which is due to virtual excitations to higher atomic levels.
 
shift," which is due to virtual excitations to higher atomic levels.
 +
 
In the atomic master equation, <math>\Gamma</math> is the spontaneous emission
 
In the atomic master equation, <math>\Gamma</math> is the spontaneous emission
 
rate, given by Fermi's golden rule
 
rate, given by Fermi's golden rule
Line 320: Line 399:
 
\,,
 
\,,
 
</math>
 
</math>
as derived in API.
+
as derived [[Lineshape|elsewhere]].
 +
 
 
=== Full derivation -- walk-through ===
 
=== Full derivation -- walk-through ===
 
We now turn to a full derivation of the general master equation.
 
We now turn to a full derivation of the general master equation.
 +
 +
==== Master equation in integral form for arbitrary interaction ====
 +
 
Following the notation used in API, Chapter 4, let <math>A</math> denote the
 
Following the notation used in API, Chapter 4, let <math>A</math> denote the
 
system, and <math>R</math> the environment (known as the reservoir in API).  The
 
system, and <math>R</math> the environment (known as the reservoir in API).  The
Line 333: Line 416:
 
interaction picture defined by <math>H_A</math> and <math>H_R</math>, the equation of motion
 
interaction picture defined by <math>H_A</math> and <math>H_R</math>, the equation of motion
 
for the full system + reservoir density matrix is
 
for the full system + reservoir density matrix is
:<math>  
+
{{Eq
 +
|math=
 +
<math>  
 
i\hbar \dot{\rho} = [V,\rho]
 
i\hbar \dot{\rho} = [V,\rho]
 
\,.
 
\,.
 
 
</math>
 
</math>
 +
|num=3.5.1
 +
}}
 
Integrating this once gives
 
Integrating this once gives
 
:<math>  
 
:<math>  
Line 343: Line 429:
 
\,.
 
\,.
 
</math>
 
</math>
Substituting this back into Eq.(\ref{eq:vnrho}) gives
+
Substituting this back into Eq.(3.5.1) gives
 
:<math>  
 
:<math>  
 
\dot{\rho} = -\frac{1}{\hbar^2} \int_0^t [V(t),[V(t'),\rho(t')]]\,dt'
 
\dot{\rho} = -\frac{1}{\hbar^2} \int_0^t [V(t),[V(t'),\rho(t')]]\,dt'
Line 356: Line 442:
 
</math>
 
</math>
 
This gives us our starting point for a general master equation:
 
This gives us our starting point for a general master equation:
:<math>  
+
{{Eq
 +
|math=<math>  
 
\dot{\rho}_{A}
 
\dot{\rho}_{A}
 
= -\frac{1}{\hbar^2} {\rm Tr}_R
 
= -\frac{1}{\hbar^2} {\rm Tr}_R
 
\int_0^t [V(t),[V(t'),\rho_A(t') \otimes \rho_R ]]\,dt'
 
\int_0^t [V(t),[V(t'),\rho_A(t') \otimes \rho_R ]]\,dt'
 
\,.
 
\,.
 
 
</math>
 
</math>
 +
|num=3.5.2
 +
}}
 +
 +
==== Master equation for a two-level atom interacting with the vacuum ====
 +
 
An example is helpful in seeing how this equation works.  Generally,
 
An example is helpful in seeing how this equation works.  Generally,
 
we will take system + reservoir interactions of the form <math>V = -A R</math>,
 
we will take system + reservoir interactions of the form <math>V = -A R</math>,
Line 383: Line 474:
 
\,.
 
\,.
 
</math>
 
</math>
Insert this now into Eq.(\ref{eq:rhome}), but disregard the integral
+
Insert this now into Eq.(3.5.2), but disregard the integral
 
over time (this lets us see what the essential dynamics are, at the
 
over time (this lets us see what the essential dynamics are, at the
 
expense of not obtaining the correct specific rates).  The
 
expense of not obtaining the correct specific rates).  The
Line 403: Line 494:
 
states, and thus disappear in the partial trace over the reservoir.
 
states, and thus disappear in the partial trace over the reservoir.
 
We find, finally:
 
We find, finally:
:<math>  
+
{{Eq
 +
|math=<math>  
 
\dot{\rho}_{A} = -\frac{\Gamma}{2}  \left[    {  \sigma_+  \sigma_-  \rho_A - 2 \sigma_- \rho_A \sigma_+  
 
\dot{\rho}_{A} = -\frac{\Gamma}{2}  \left[    {  \sigma_+  \sigma_-  \rho_A - 2 \sigma_- \rho_A \sigma_+  
 
+ \rho_A \sigma_+  \sigma_- } \right]  
 
+ \rho_A \sigma_+  \sigma_- } \right]  
 
\,.
 
\,.
 
</math>
 
</math>
 +
|num=3.6.1
 +
}}
 
This is the master equation for a two-level atom dipole coupled to a
 
This is the master equation for a two-level atom dipole coupled to a
 
single electromagnetic mode initially in the vacuum state.  It is
 
single electromagnetic mode initially in the vacuum state.  It is
 
written in a form known as the "Lindblad" form, which is very
 
written in a form known as the "Lindblad" form, which is very
 
common.  In atomic physics, you will often see master equations like
 
common.  In atomic physics, you will often see master equations like
this.  The Lindblad form has the special property that it ensures
+
this.   
 +
 
 +
The Lindblad form has the special property that it ensures
 
<math>\rho</math> is a legitimate density matrix at all times; not only does
 
<math>\rho</math> is a legitimate density matrix at all times; not only does
 
<math>{\rm Tr}(\rho)=1</math> always, but also, its eigenvalues remain
 
<math>{\rm Tr}(\rho)=1</math> always, but also, its eigenvalues remain
Line 426: Line 522:
 
then we find
 
then we find
 
:<math>  
 
:<math>  
\dot{\rho}_A = -\Gamma  \left[ \begin{array}{cc}{ 2 a}&{b}\\{c}&{-2a}\end{array}\right]  
+
\dot{\rho}_A = -\frac{\Gamma}{2} \left[ \begin{array}{cc}{ 2 a}&{b}\\{c}&{-2a}\end{array}\right]  
 
\,,
 
\,,
 
</math>
 
</math>
 
which is identical to the master equation we constructed for the
 
which is identical to the master equation we constructed for the
beamsplitter example, Eq.(\ref{eq:bsme}), up to a relabeling of <math>|g{\rangle}</math>
+
beamsplitter example, Eq.(3.3.2), up to a relabeling of <math>|g{\rangle}</math>
 
and <math>|e{\rangle}</math>.
 
and <math>|e{\rangle}</math>.
 +
 
As shown by this example, the physical picture behind the master
 
As shown by this example, the physical picture behind the master
 
equation is not so complicated, even though the mathematics (used in
 
equation is not so complicated, even though the mathematics (used in
 
all its glory) can be overwhelming.
 
all its glory) can be overwhelming.
 +
 +
==== Putting it together: the optical Bloch equations ====
 +
 
The equation of motion for <math>\dot{\rho}</math> we have obtained is very close
 
The equation of motion for <math>\dot{\rho}</math> we have obtained is very close
 
to the classical Einstein equations we began with, as we can see by
 
to the classical Einstein equations we began with, as we can see by
 
writing out equations of motion for the individual components of
 
writing out equations of motion for the individual components of
 
<math>\rho</math>.  Explicitly, and including Hamiltonian evolution under the
 
<math>\rho</math>.  Explicitly, and including Hamiltonian evolution under the
classical field Jaynes-Cummings interaction, we find
+
classical field Jaynes-Cummings interaction, Eq.(3.1.1), we find
 
:<math>\begin{array}{rcl}   
 
:<math>\begin{array}{rcl}   
\dot{\rho_{ee}} &=& i\Omega(\rho_{eg}-\rho_{ge}) - \Gamma \rho_{ee}
+
\dot{\rho}_{ee} &=& i\frac{\omega_R}{2}(\rho_{eg}-\rho_{ge}) - \Gamma \rho_{ee}
 
\\
 
\\
\dot{\rho_{ge}} &=& i\omega_0\rho_{ge} - i\Omega(\rho_{ee}-\rho_{gg})
+
\dot{\rho}_{ge} &=& i\omega_0\rho_{ge} - i\frac{\omega_R}{2}(\rho_{ee}-\rho_{gg})
 
- \frac{\Gamma}{2} \rho_{ge}
 
- \frac{\Gamma}{2} \rho_{ge}
 
\,,
 
\,,
 
\end{array}</math>
 
\end{array}</math>
where the other two components are given by <math>\rho_{gg}=1-\rho{ee}</math> and
+
where the other two components are given by <math>\rho_{gg}=1-\rho_{ee}</math> and
 
<math>\rho_{eg} = \rho_{ge}^*</math>.  These differential equations are known as
 
<math>\rho_{eg} = \rho_{ge}^*</math>.  These differential equations are known as
 
the Optical Bloch Equations, and we will base a great deal of
 
the Optical Bloch Equations, and we will base a great deal of

Latest revision as of 20:45, 24 March 2017

The master equation is an equation of motion for a density matrix describing an open quantum system, much like the Schrodinger equation describes the evolution of a closed quantum system. This section provides a derivation of the master equation for a spontaneously emitting atom, driven by a classical field, which is known as the Optical Bloch Equation.

Classical model of atom and field

A good starting point, to appreciate the problem of open quantum systems, is the classical model for a two-level atom coupled to a black-body electromagnetic field, the Einstein rate equations

where is the spontaneous emission rate, and are stimulated emission rates, and is the field energy density at atomic frequency , for levels denoted by and .

Is there a straightforward quantum analogue of this? We might be tempted to simply add a damping term to the Schrödinger equation, like

but this is not physically allowed by quantum mechanics! How, then, can we construct a fully quantum-mechanical description of open system dynamics? The key concept is that we must properly account for noise:

Chapter4-obe-part-1-obe-fig2.png

From classical thermodynamics, we know that any time there is energy transfer from a system to the environment, there is entropy exchanged back from the environment to the system. This is a simple illustration of the very basic fluctuation--dissipation principle: there can be no relaxation without con-commitment noise! To study quantum open system, we must model the appropriate quantum noise contribution which goes along with relaxation.

Density matrices and closed system dynamics

The main tool we shall use to model open quantum systems is the density matrix representation for quantum states, so it is helpful to begin with a review of density matrices and how they evolve under Hamiltonian dynamics.

Review of density matrices: definition, properties, and unravelings

Recall that a density matrix for a pure state is the matrix . Thus, for example

Density matrices may also represent statistical mixtures of pure states; this state

can be interpreted as a 50/50 mixture of and . However, one must be careful, because there are infinitely many ways to unravel a density matrix into statistical mixtures of pure states.

For example,

is

but it is also

where

In general, a density matrix may always be written as a statistical mixture of pure states,

where are probabilities, such that,

A matrix is a valid density matrix if and only if the eigenvalues of are non-negative, and sum to one, such that . represents a pure state if and only if .

Density matrices: closed system evolution

How does a density matrix evolve in a closed system? From the Schrodinger equation

it follows that a pure state density matrix evolves as

For example, if is a two-level atom evolving under the classical field Jaynes-Cummings Hamiltonian

which we may express using Pauli matrices as

then for

the equation of motion for is

In terms of the matrix components, this is

(3.1.1)

noting that and .

We can recognize this as a rotation of the Bloch vector about the axis defined by

by using the Bloch sphere representation for a density matrix,

Density matrices and open system dynamics: approach

We can build a mathematical model for quantum open system dynamics, based on four basic ideas:

Density matrix evolution

Instead of pure states (eg ), we describe the system state using a density matrix . The equation of motion for is

where is known as the Liouvillian operator (or a "superoperator"). For example, for Hamiltonian evolution, we have:

which, for gives

This is unitary evolution, but in general, the differential equation for can describe non-unitary evolution. Such differential equations are known as "master equations." They are nontrivial to construct, because they must restrict to be a legitimate density matrix at all times.

Partial trace

We are interested in the state of the system alone, and want to disregard the state of the environment. If is the state of the whole system + environment, then the state of the system alone is

Assumptions about the environment

The environment is also known as a "bath" or a "reservoir" (cf API). We model it as being an ensemble of oscillators, of a variety of frequencies, which are weakly coupled to the system. It has several important properties:

  • Large and unchanging -- Born approximation
  • Short correlation time -- Markov approximation

Two (very different) timescales

There are two important timescales in this model:

  • : A slow evolution of the system
  • : The fast fluctuations of the environment

We will build equations of motion which have a timescale , chosen such that .

Our goal is to construct a model dynamical equation of motion for of the form

where is time independent. This is known as a "coarse grained" evolution equation. It is desirable to obtain for a variety of scenarios, including interactions where the system + environment are atom + light, light + light, and atom + motion, for example. Below, we construct a master equation for the atom + vacuum using two different approaches.

Beamsplitter model of the master equation

The physical intuition behind the master equation we desire to construct can be captured with a simple example, which builds on the beamsplitter we studied in previous lectures.

Single photon through beamsplitter: pure state description

Consider a single photon state (for simplicity, let the coefficients be real-valued) entering a beamsplitter of angle :

Chapter4-obe-part-1-obe-fig3.png

A vacuum state is input to the other port, whose output we discard. Let us consider the photon as being our system, and the other (initially vacuum) mode as being our environment. What is the quantum state of the undiscarded output? Naively, we might argue that a single photon is discarded into the environment with probability , so that we might expect the output to be with probability , and with probability .

However, that (semi-)classical argument is incorrect. The output state of the system + environment is

Thus, the correct result is that the output is , with probability , and with probability .


Single photon through beamsplitter: density matrix description

These states can conveniently be written as density matrices. The input state is

(3.3.1)

and the output state is

Note that cannot be written as for any pure state , because it is not pure (it is a statistical mixture). The change in is

Single photon through many beamsplitters: coarse-grained evolution

Now imagine that we send the single photon state through many beamsplitters in a sequence, each with some small tap angle :

Chapter4-obe-part-1-obe-fig4.png

We make two assumptions: the environment modes always begin in the vacuum (this is the Born approximation), and the environment is completely different and uncorrelated between scattering events (this is the Markov approximation).

This allows us to write a coarse-grained differential equation for the photon state

Expressed as differential equations for each of the independent matrix elements, we get (using Eq.(3.3.1) for )

for the diagonal elements.

These describe the evolutions of the probabilities of finding the photon in the and states, and are analogous to the Einstein rate equations. And for the off-diagonal elements we get

which show the decay of the quantum coherence of the state.

Note that the input state we have used in this model is a pure state, but essentially the same result holds if the input is a general mixed state. Specifically, if the input were an arbitrary density matrix

then the coarse-grained differential equation for this input would be

(3.3.2)

Comparison to the general master equation

The form of these differential equations, which are master equations, is very general, and almost exactly the same result is obtained for a two-level atom interacting with the vacuum. In particular, we shall see that in the master equation for a two-level atom undergoing spontaneous emission, the coherences (the off-diagonal terms) decay twice as fast as the populations (the diagonal terms). That essential physics is captured perfectly by the beamsplitter model, namely Eq.(3.3.2).

There are differences in the atomic master equation, however. In particular,the coherences evolve as

where is a frequency shift of the system known as the "Lamb shift," which is due to virtual excitations to higher atomic levels.

In the atomic master equation, is the spontaneous emission rate, given by Fermi's golden rule

as derived elsewhere.

Full derivation -- walk-through

We now turn to a full derivation of the general master equation.

Master equation in integral form for arbitrary interaction

Following the notation used in API, Chapter 4, let denote the system, and the environment (known as the reservoir in API). The full Hamiltonian is

where is the system-reservoir interaction potential. In the interaction picture defined by and , the equation of motion for the full system + reservoir density matrix is

(3.5.1)

Integrating this once gives

Substituting this back into Eq.(3.5.1) gives

If we assume that the system and reservoir are initially uncorrelated, and make the approximation that the reservoir stays unchanged (the Born approximation), then

This gives us our starting point for a general master equation:

(3.5.2)

Master equation for a two-level atom interacting with the vacuum

An example is helpful in seeing how this equation works. Generally, we will take system + reservoir interactions of the form , where acts only on the system, and acts only on the reservoir. Specifically, let the system be a two-level atom, and the environment be a single electromagnetic mode initially in the vacuum state . The atom interacts with the usual dipole interaction,

which is conveniently written using Pauli raising and lowering operators

where

Insert this now into Eq.(3.5.2), but disregard the integral over time (this lets us see what the essential dynamics are, at the expense of not obtaining the correct specific rates). The relevant commutators are

and

where the "other" terms are not diagonal in the electromagnetic mode states, and thus disappear in the partial trace over the reservoir. We find, finally:

(3.6.1)

This is the master equation for a two-level atom dipole coupled to a single electromagnetic mode initially in the vacuum state. It is written in a form known as the "Lindblad" form, which is very common. In atomic physics, you will often see master equations like this.

The Lindblad form has the special property that it ensures is a legitimate density matrix at all times; not only does always, but also, its eigenvalues remain non-negative. And more importantly, the map from to is completely positive, meaning that if the map operates on just part of a larger system, the state of the larger system remains described by a valid, positive density matrix. Using the definitions for , if we express as

then we find

which is identical to the master equation we constructed for the beamsplitter example, Eq.(3.3.2), up to a relabeling of and .

As shown by this example, the physical picture behind the master equation is not so complicated, even though the mathematics (used in all its glory) can be overwhelming.

Putting it together: the optical Bloch equations

The equation of motion for we have obtained is very close to the classical Einstein equations we began with, as we can see by writing out equations of motion for the individual components of . Explicitly, and including Hamiltonian evolution under the classical field Jaynes-Cummings interaction, Eq.(3.1.1), we find

where the other two components are given by and . These differential equations are known as the Optical Bloch Equations, and we will base a great deal of our study of atoms and light forces on this quantum description of open system dynamics of a spontaneously emitting atom driven by a classical field.

References